Ovaj operativni sistem je predvidjen za ix86 arhitekturu procesora.U pocetku ce biti u text-mode only, ali u buducnosti nadam se da cemo uvesti simple GUI!Ovaj projekat ce biti pod GPL licencom i svaki segment koda ce svakome uvek biti dostupan.Razvijanje ovog operativnog sistema cu zapocetu sa jednostavnim bootloaderom:
Code:
[BITS 16] ; We need 16-bit intructions for Real mode
[ORG 0x7C00] ; The BIOS loads the boot sector into memory location 0x7C00
reset_drive:
mov ah, 0 ; RESET-command
int 13h ; Call interrupt 13h
or ah, ah ; Check for error code
jnz reset_drive ; Try again if ah != 0
mov ax, 0
mov es, ax
mov bx, 0x1000 ; Destination address = 0000:1000
mov ah, 02h ; READ SECTOR-command
mov al, 02h ; Number of sectors to read = 1
mov ch, 0 ; Cylinder = 0
mov cl, 02h ; Sector = 2
mov dh, 0 ; Head = 0
int 13h ; Call interrupt 13h
or ah, ah ; Check for error code
jnz reset_drive ; Try again if ah != 0
cli ; Disable interrupts, we want to be alone
xor ax, ax
mov ds, ax ; Set DS-register to 0 - used by lgdt
lgdt [gdt_desc] ; Load the GDT descriptor
mov eax, cr0 ; Copy the contents of CR0 into EAX
or eax, 1 ; Set bit 0
mov cr0, eax ; Copy the contents of EAX into CR0
jmp 08h:clear_pipe ; Jump to code segment, offset clear_pipe
[BITS 32] ; We now need 32-bit instructions
clear_pipe:
mov ax, 10h ; Save data segment identifyer
mov ds, ax ; Move a valid data segment into the data segment register
mov ss, ax ; Move a valid data segment into the stack segment register
mov esp, 090000h ; Move the stack pointer to 090000h
jmp 08h:01000h ; Jump to section 08h (code), offset 01000h
gdt: ; Address for the GDT
gdt_null: ; Null Segment
dd 0
dd 0
gdt_code: ; Code segment, read/execute, nonconforming
dw 0FFFFh
dw 0
db 0
db 10011010b
db 11001111b
db 0
gdt_data: ; Data segment, read/write, expand down
dw 0FFFFh
dw 0
db 0
db 10010010b
db 11001111b
db 0
gdt_end: ; Used to calculate the size of the GDT
gdt_desc: ; The GDT descriptor
dw gdt_end - gdt - 1 ; Limit (size)
dd gdt ; Address of the GDT
times 510-($-$$) db 0 ; Fill up the file with zeros
dw 0AA55h ; Boot sector identifyer
[BITS 16] ; We need 16-bit intructions for Real mode
[ORG 0x7C00] ; The BIOS loads the boot sector into memory location 0x7C00
reset_drive:
mov ah, 0 ; RESET-command
int 13h ; Call interrupt 13h
or ah, ah ; Check for error code
jnz reset_drive ; Try again if ah != 0
mov ax, 0
mov es, ax
mov bx, 0x1000 ; Destination address = 0000:1000
mov ah, 02h ; READ SECTOR-command
mov al, 02h ; Number of sectors to read = 1
mov ch, 0 ; Cylinder = 0
mov cl, 02h ; Sector = 2
mov dh, 0 ; Head = 0
int 13h ; Call interrupt 13h
or ah, ah ; Check for error code
jnz reset_drive ; Try again if ah != 0
cli ; Disable interrupts, we want to be alone
xor ax, ax
mov ds, ax ; Set DS-register to 0 - used by lgdt
lgdt [gdt_desc] ; Load the GDT descriptor
mov eax, cr0 ; Copy the contents of CR0 into EAX
or eax, 1 ; Set bit 0
mov cr0, eax ; Copy the contents of EAX into CR0
jmp 08h:clear_pipe ; Jump to code segment, offset clear_pipe
[BITS 32] ; We now need 32-bit instructions
clear_pipe:
mov ax, 10h ; Save data segment identifyer
mov ds, ax ; Move a valid data segment into the data segment register
mov ss, ax ; Move a valid data segment into the stack segment register
mov esp, 090000h ; Move the stack pointer to 090000h
jmp 08h:01000h ; Jump to section 08h (code), offset 01000h
gdt: ; Address for the GDT
gdt_null: ; Null Segment
dd 0
dd 0
gdt_code: ; Code segment, read/execute, nonconforming
dw 0FFFFh
dw 0
db 0
db 10011010b
db 11001111b
db 0
gdt_data: ; Data segment, read/write, expand down
dw 0FFFFh
dw 0
db 0
db 10010010b
db 11001111b
db 0
gdt_end: ; Used to calculate the size of the GDT
gdt_desc: ; The GDT descriptor
dw gdt_end - gdt - 1 ; Limit (size)
dd gdt ; Address of the GDT
times 510-($-$$) db 0 ; Fill up the file with zeros
dw 0AA55h ; Boot sector identifyer
P.S.Ovaj kod je preuzet iz jednog tutorial-a ali je sam prilicno jasan.Ne secam se imena malopre pomenutog tutorial-a ali jednostavno da nagalsim da ovo nije moje licno autorsko delo.Nadam se da ce se i ostali ukljuciti.Sve ispravke i dopune su dobrodosle.HVALA!
n